MAICO I.S.: before to start

Before opening Inscoper Software, you need to turn on and calibrate the MEMS unit:
  1. Turn the Power key from Off to On. The led will go from orange light to green blinker light.
  2. You need to wait 5 to 10 min to get a stable temperature. After this, the “laser calibration” button will be green.
  3. You need to press it to proceed to the calibration.
    Important: the shutter needs to be open for this step.
  4. The green light of the button will be off when the calibration is done.
  5. After this step, you can turn on the Inscoper Software.