Home
Solutions
From core solution to custom techniques
Inscoper I.S.
Incorporating a specially-designed device, Inscoper I.S. provides a new user experience with improved technical performance, system integration and ease-of-use.
Acquisition
This tab allows you to set the entire acquisition sequence, using all the system's dimension modules.
Dimensions
Multiwell plate mode
The Inscoper software has a strong feature for imaging multiwell plates and for some applications including High Content Imaging.
Multiwell plate feature
Multiwell plate calibration

Solutions
From core solution to custom techniques
- Inscoper I.S.
  Incorporating a specially-designed device, Inscoper I.S. provides a new user experience with improved technical performance, system integration and ease-of-use.
  - User journey
  - Getting started
    When you launch the Inscoper I.S. software, the start window will appear. You will have access to the software version number and can choose from several options to begin your user journey:
  - Display settings
    To access the interface settings, click on Settings > Display Settings.
  - Configuration
  - Acquisition
    This tab allows you to set the entire acquisition sequence, using all the system's dimension modules.
    - Dimensions
      - Time
        The Time dimension is used to run time-lapse and image cells over a long period of time.
      - Multichannels
        This dimension is useful to select two (or more) channels and add them in the acquisition sequences.
      - Positions
        This dimension is dedicated to image different XYZ positions from a sample. You can switch from this dimension to the Tiling dimension by the button Switch to Tiling.
      - Tiling
      - Multiwell plate mode
        The Inscoper software has a strong feature for imaging multiwell plates and for some applications including High Content Imaging.
        Well plate editor
        The Multiwell plate mode of the Inscoper I.S. is compatible with all commercial or homemade supports (multi-well, multi-slide, etc.). An option Well Plate Editor allows you to simply add a large panel of supports.
        Multiwell plate feature
        In Positions dimension
        In Tiling dimension
        Multiwell plate calibration
        Focus Map creation
      - Automated Focus Map
        The Automated Focus Map is a software optional feature of the Inscoper I.S. that automatically generates a relief map of the biological sample when performing tiling imaging.
      - Autofocus
        The Inscoper I.S. software has an auto-focus mode to keep samples at the perfect focus throughout the acquisition sequence.
    - Multi-sequence acquisition
      When an acquisition sequence is ready, it is possible to launch it or to add others to create a multi-sequence acquisition.
    - Data Processor
    - Saving images and metadata
  - Visualization
  - Data export
  - Semi-automated feedback microscopy feature
    The Inscoper I.S. can be used to perform some feedback microscopy experiments. For example, you can image a large sample using the tiling dimension. Then you can select a few areas of interest on this large image and automatically import them into a new sequence.
- scanFRAP
- fastFLIM
- liveRATIO
- MAICO I.S.

Multiwell plate calibration

This step is needed to get precise positions of the well, and then to optimize the XY stage movements. To use the well plate feature:

Click on Find Center to start the semi-automated protocol.
Select the well to be used for well plate calibration.
Move manually the stage to this position if it was not previously done.
Fit the edge of the well with the virtual cross by moving the xy stage on the live image and click on Add
Repeat twice on different sides of the well.
Click on Confirm to finish.
When these steps are finished, you can move to each well automatically.